One of the most common problems hikers and backpackers experience are blisters. They may be small, but they can easily be painful enough to end your trip. We put together this guide to help teach you how to prevent blisters entirely, to learn how to treat them, and to provide general foot care tips to keep your tootsies happy and healthy on the trail.
What Causes Blisters?
Pressure, heat, and moisture are the leading culprits that cause blisters to form on your feet while hiking. By learning to minimize these catalysts, you’ll be able to keep your dogs feeling good and charging down the trail. If your pups do start to bark, this post will teach you exactly what to do to manage the situation, minimize pain, and start down the path to healing, instead of letting blister problems escalate.
Trail Runners vs. Boots – We almost always wear trail runners for hiking and backpacking for reasons we explain in our 5 Reasons to Ditch Your Hiking Boots post. To summarize, trail runners are far more comfortable, lightweight, breathable, and quick-drying than boots. There are however, some situations when boots can come in clutch. For a more in-depth look at what we look for in excellent footwear for hiking, check out our 10 Best Hiking Shoes and Boots list.
How to Prevent Blisters
Proper Footwear Fit – The most important factor in staying blister-free is making sure your shoes/boots fit well. Footwear that fits too tightly will almost certainly create pressure that’ll create blisters, so aim for a relaxed fit. A little extra roominess in your shoe (especially in the toe box) is a good, but you don’t want your feet to be slipping and sliding either, so make sure your shoes fit just right. A good pair of insoles can really help if you’re feet are between sizes or need extra support as well.
Feet Grow on Long Trails – If you’re hiking long-distance, keep in mind that your preferences may change and your feet may flatten/widen as you log serious miles. We don’t recommend buying all of your shoes at once for a thru-hike since you may want to upsize towards the tail end of your journey. One of our writer’s feet grew by almost 2 sizes over her 2 thru-hikes!
Break in New Footwear (Especially Boots) – If you plan to wear brand new footwear (especially boots) on a trip, make sure to break them in by wearing them around before you head into the backcountry. New shoes/boots can be quite stiff and if there are areas of pressure or friction, you’ll want to address those from the comfort of your own home and make adjustments as needed. Worn-in footwear is far more comfortable and eventually, your shoes will conform to your feet, but make sure old boots still have good tread on the sole and cushion/support on the inside. Unfortunately, no shoes or boots last forever.
Keep Feet Clean – Keeping your feet as clean as possible will help reduce chafing caused by dirt and debris while also reducing the chances of blisters becoming infected. Seize opportunities to rinse your feet in cool flowing water and clean them in camp at the end of the day. After long days of hiking (and wet feet in rainy conditions), it’s always important to keep your feet clean and dry throughout the night to allow your skin to recuperate.
Change Your Socks – It’s wise to carry at least 2 pairs of hiking socks so you can swap them out as needed and rinse/dry another pair for later. We keep a large safety pin clipped to the back our packs to secure socks and bandanas so they can air dry while we’re on the move. We also like to pack a pair of comfy warm socks and reserve them for wearing in our sleeping bags at night. Keeping your feet in relatively clean socks will help keep your feet healthier, more comfortable, and blister-free.
Good Socks – Quality socks are critical for keeping your feet dry and cool on the trail. Wool and synthetic fibers are best for wicking sweat away from your skin, and they dry quickly after water crossings too. Cotton should be avoided since it performs poorly and can lead to blisters. Good hiking socks should fit snugly without wrinkling to minimize friction. Wearing thin liner socks under another pair of socks is a good way to create a double-layer system for those who are extra susceptible to blisters. And some hikers find toe socks to be helpful, particularly in preventing blisters between the toes. For more details, check out our list of the Best Hiking Socks.
Adjust Your Laces – Taking the time to adjust your shoe/boot laces for different terrain is well worth a pause to keep your feet in good shape. Most of the time, we keep our shoes laced loosely to allow our feet to swell and be comfortable. But on long steep descents, we tighten our laces at the instep (where ankle meets foot) to prevent our toes from hitting the fronts of our shoes.
Get Some Air Time – Taking off your shoes and socks to air out your feet during breaks feels good and can go a long way for preventing blisters. Sure, it takes a few extra minutes, but it’s well worth the effort to let your skin breathe and give your socks a chance to dry out. Our general rule is that if we’re taking a break for 15 minutes or longer, the shoes come off. Elevating your legs and feet by propping them up with your pack can also reduce swelling and speed the recovery of your lower body. This is also an excellent opportunity to dump out any debris that got into your shoes and to inspect your feet for hot spots.
How to Treat Hot Spots
- STOP – If you notice any foot pain or discomfort while you’re hiking, STOP IMMEDIATELY, find a place to sit, and take off your shoes to assess the situation. It takes a little time to do this and can be annoying to stop, but this simple step will easily save you tons of time and pain in the long-run.
- TAPE – If a blister hasn’t formed yet, clean and dry the area, then cover the hot spot with a thin layer of duct tape to reduce friction. Make sure the duct tape is affixed as smoothly to your skin as possible.
- LUBE – If the skin is red and raw or a blister has partially formed, use antibiotic ointment on it and then cover the hotspot with a blister bandage, Bandaid, or Moleskin before applying tape.
- LEAVE – If the hot spot doesn’t get worse, try to leave the tape in place until you return home and can remove it very carefully to avoid injuring the skin.
How to Treat Blisters
Sometimes, no matter how good you try to be with prevention, you still end up with a blister. But if you have the right first-aid supplies with you and know how to use them, you can still be able to manage the situation and continue to hike without pain or worry.
- CLEAN your hands and the blistered area with soap and water or an alcohol/antiseptic wipe.
- STERILIZE a safety pin, sewing needle, scalpel blade, or small knife with an alcohol wipe, boiling water, or flame Tip: Always try to keep the ‘roof’ or blister top in place to prevent infection and keep the more sensitive skin beneath covered.
- PIERCE the blister from the bottom with the pin, needle, or blade, slightly elongating the hole by gently moving your tool side to side (a pinhole will close up too quickly).
- DRAIN the fluid from the blister by carefully massaging it down and out.Tip: If you have a needle with an eye, you can pierce the blister from top to bottom, threading it with a short segment of sterilized floss or thread to create a wick that allows drainage to continue as you hike. We keep a tiny spool of braided fishing line and a big eye needle in our blister kit for this purpose as well as emergency repairs.
- COVER the blister with antibiotic ointment to prevent infection
- PAD around the blister with a piece of Moleskin or Molefoam cut into a donut shape. The hole in the center should be slightly larger than the blister.
- BANDAGE the blister with a piece of gauze, an adhesive Bandaid or Moleskin
- TAPE over the blister and surrounding area with a larger piece of duct or KT tape
Blister First Aid Kit
Make sure you’re prepared to prevent and treat blisters by carrying the proper supplies in your first aid kit, or make a small “blister kit” to keep in an easily accessible place in your backpack. Every kit should have:
- Duct tape (we like to wrap it around an empty pill bottle, which can also store a needle, pins, and thread.)
- Moleskin and/or Molefoam
- Lightweight multitool with scissors, tweezers, and small knife
- Soap, alcohol or antiseptic wipes
- Safety pin, sewing needle, or scalpel blade
- Braided fishing line, nylon thread, or dental floss on a tiny spool (optional)
- Bandaids (optional)
- Gauze (optional)
- Blister bandages (optional)
- KT tape (optional) – Elastic therapeutic tape, also called kinesiology tape, or KT, is an elastic cotton strip with strong acrylic adhesive that is used to treat pain and disability from athletic injuries. It has excellent holding power for blister care and is helpful for supporting many other common overuse injuries as well.
Foot Care Tips
Taking good care of your feet before, during, and after backpacking trips is a good habit that keeps blisters at bay, makes your feet stronger/healthier, and makes your experience more enjoyable. There’s no shame in having a solid self-care routine on and off the trail.
AT HOME OR IN TRAIL TOWNS:
- Trim toenails short and keep them filed smoothly, eliminating sharp edges and points. A well-equipped lightweight multitool like the Swiss Army Classic can replace clippers, scissors, a file, tweezers, and a knife for maintenance on the go.
- Clean feet regularly and thoroughly, paying attention to details like removing dirt from under toenails.
- Moisturize the skin with lotion or coconut oil to prevent painful cracking and unnecessary roughness that creates friction and wears out socks.
- Rest and elevate your feet during downtime to reduce swelling. If blisters are really bad, you may need to give them a day or more off to heal properly before moving on.
- Soak sore feet in warm water to relax the muscles and tendons. Extra bonus if you add Epsom salt to speed recovery (use hotel room bathtub or sink, bear canister, or whatever vessel you can find).
- Massage feet for a few minutes a day to keep them strong and flexible. Foot massage is also beneficial for circulation, promoting restful sleep, stimulating healing in the body, and preventing ankle injuries.
- Treat athlete’s foot or other skin irritations by soaking feet in warm water with a shot of apple cider vinegar diluted in it.
- Smooth thick calluses with a pumice stone or foot rasp to prevent blisters from forming underneath them (especially in the heel). It’s good for hiker feet to be slightly tough instead of baby-bottom smooth, but the skin should be alive, pliable, and healthy.
Prevention is far easier than finding a cure when it comes to blisters, but if you’re prone to getting them, don’t give up. Step up your foot care game, walk or hike frequently, and experiment with footwear until you find until you find a winning combination. By simply paying a little more attention and getting to know your feet, your hiking experiences will be much less painful and far more enjoyable.
We hope you enjoyed this guide and that it will help you avoid getting blisters! Please share this post with your friends that might like these tips.
To learn more backpacking skills, check out our 2 HD video series and stop by our Blog, where we regularly post tutorials, gear reviews, and trip photos. We also have Trip Guides to get you inspired. To take a look at the best backpacking gear on the market and see how it compares to each other, check out our popular round-up lists.
Disclosure: Some of the links on this page are affiliate links, which means we may receive a modest commission if purchases are made through those links. This adds no cost to our readers and helps us keep our site up and running. Our reputation is our most important asset, which is why we only provide completely honest and unbiased recommendations.